
SB-1012
March 27, 1964
SUBJECT: Engineering change - inlet water tube - long shaft V4 models.
60 HP Models VXHL-10S (High thrust lower unit)
75 HP Models V4SL-16A
75 HP Models V4HL-16A (High thrust lower unit)
75 HP Models V4AL-16D
90 HP Models V4ML-10S
Reports indicate that under certain conditions, part #307531 Water Tube may develop small cracks at the water spray hole on V4 series engines - causing engine temperature to rise slightly above normal during prolonged full throttle operation. Because of this, production changes have recently been processed on all long shaft engine models listed above, replacing the long one-piece inlet water tube (307531) with a standard length tube (307530), a five inch tube extension (306563) and an o-ring (553127).
It has been determined that this type of problem results from excessive vibration - which in this instance is generally caused by a bent propeller blade or similar out of balance condition. The combination of a standard length water tube and five inch extension are able to withstand vibration of the type mentioned here, however, without developing small cracks at the spray hole.
Starting serial numbers of long shaft V4 series engines built with the standard length tube and extension are:
| 60 HP | VXL-10S | 2460735 |
| 60 HP | VXHL-10S | 2441415 |
| 75 HP | V4SL-16A | 2437884 |
| 75 HP | V4HL-16A | 2441610 |
| 75 HP | V4AL-16D | 2437884 |
| 90 HP | V4ML-10S | 2440804 |
We realize there are probably many dealers who have quantities of 307531 Water Tube on hand. These tubes can be modified for service use by cutting exactly five inches off the bottom end of the tube and adding to it, one 553127 O-ring and one 306563 Extension. This also reduces the amount of service stock by having only one tube and extension to handle service on both long and standard length engines.
The inlet tube is the shorter of the two water tubes in the V4 lower unit. It can also be identified by a water spray hole which the outlet tube does not have.
The long shaft outlet water tube (305535) is not affected from vibration and will continue to be used in production.
JOHNSON MOTORS
Robert Compton
Administrative Assistant
RC:eb
NOTE: Post on your VX-60 HP, V4-75 HP and VM-90 HP indexes under the heading of "Lower Unit".