Johnson Service Bulletin SB-1033 - Special Heli-Coils for Repairing Stripped Spark Plug Holes

Issued November 2, 1964. Johnson Motors introduced approved thread-repair inserts and a special installation tool for repairing stripped spark plug holes without replacing the cylinder head.

Johnson Motors Service Bulletin factory letterhead

November 2, 1964 SB-#1033

SUBJECT:  SPECIAL HELI-COILS FOR REPAIRING STRIPPED SPARK PLUG HOLES.

Here's a chance to bring added profits to your service shop and at the same time save your customer money on repairs.

How? - Simply order a supply of special Outboard Marine Engineering approved Heli-Coil inserts for repairing stripped spark-plug holes. Then as the occasion arises, don't discard a cylinder head simply because the spark-plug threads are stripped - repair it. The repair labor plus the insert used will cost your customer far less than a replacement cylinder head so he'll be happy - and you will have made a nice profit because you had equipment to do the job.

A special installing tool and a package of twenty (20) Heli-Coils is awaiting shipment to your shop now at OMC parts depot. Why not get it on its way by sending them your order.

The installing tool set, part #380642, sells for $14.00 net. Instructions will be included with the tool, explaining its use. A package of twenty (20) special inserts, part #380643, sells for $18.00 net - less than one dollar apiece. Send your order, along with the full prepayment directly to:

OMC PARTS DEPOT
P. O. Box 470
Galesburg, Illinois

Do not order from the factory or from your parts distributor.

Since it is necessary to enlarge the stripped hole with a 9/16" diameter drill prior to tapping for Heli-Coil installation, the cylinder head must always be removed from the engine for this type of repair. Otherwise metal chips are apt to fall into the combustion chamber and damage the engine internally after it has been started and run.

Heli-Coil installing tool set
Part #380642 HELI-COIL INSTALLING SET ($14.00 net from OMC Parts Depot).
Heli-Coil threaded inserts
Part #380643 HELI-COIL INSERT ($18.00 net from OMC Parts Depot - 20 per package).

- over -

PAGE 2 SERVICE BULLETIN #1033
JOHNSON MOTORS, DIVISION OF OUTBOARD MARINE CORPORATION, WAUKEGAN, ILLINOIS 60086

Use of these inserts will in no way change the heat range of a properly torqued spark plug. The special material from which these Heli-Coil inserts are made will absorb heat from the plug as fast as the aluminum cylinder head does.

However, do not use substitutes. Only those special Heli-Coil inserts available from OMC Parts Depot have been approved for use in Johnson Outboard and two-cycle Inboard/Outboard engines. Use of non-OMC approved inserts will void the engine's warranty.

Cutaway cylinder head showing stripped threads and a repaired spark plug hole
Cut-a-way Cylinder head.
Sincerely,

JOHNSON MOTORS

Jack Penland
Service Promotion Manager

JP/11

Historical parts reference

380642 - Heli-Coil installing tool set, originally $14.00 net. 380643 - Package of twenty special Heli-Coil inserts, originally $18.00 net.

These are historical factory instructions. Modern repair procedures and approved materials may differ.