Johnson Service Bulletin SB-1039 - Electrical Connections

February 1965. Factory guidance for checking powerhead electrical connector terminals on 1965 Johnson 75 and 90 HP engines.

Johnson Motors gray service bulletin letterhead
SB-#1039
February, 1965
SUBJECT: ELECTRICAL CONNECTIONS
ON ENGINES: 1965 75 AND 90 H.P. MODELS
The electrical systems on these models have been changed so that all engine electrical connections are readily accessible by re- moving the motor cover.
Although connections are much easier to make, care must be used when fas- tening the terminal housings together or electrical problems can result. If connectors are not assembled pro- perly, one or more of the terminals may back out of its housing as indi- cated by the arrow. This may prevent one or more of the electrical circuits from operating, either when the ini- tial installation is made, or later after the unit has been in operation for a while.
Original factory photograph of electrical connectors and terminal housing
To eliminate the possibility of immediate or future problems due to improper connections, we suggest that you examine the terminals on both halves of the powerhead connector after each assembly to be sure that all terminal ends are securely locked in place.
JOHNSON MOTORS N. Peter Hansen Administrative Assistant
NPH:rs
NOTE: Post on your V4A 75 HP and VM 90 HP indexes under "Electrical".