Johnson Service Bulletin SB-1044 - Improper Use of Engine Cleaner

Issued in February 1965, this Johnson Motors service bulletin cautioned dealers against adding engine cleaners to the fuel tank. It explained why cleaners could damage varnished carburetor floats and other fuel-system components.

Johnson Motors Service Bulletin letterhead
February, 1965 SB-1044
SUBJECT:IMPROPER USE OF ENGINE CLEANER
ON ENGINES:ALL MODELS

It has been called to our attention that some dealers are mixing OMC "Engine Cleaner" or other engine cleaners with the fuel in the fuel tank. This practice should be discontinued immediately, and absolutely avoided in the future.

Engine cleaners accomplish their intended purpose by cleaning out gum, VARNISH, lacquer, and carbon. This means that any gum, VARNISH, lacquer or carbon with which an engine cleaner comes into contact, is likely to be adversely acted upon or removed completely.

Since the floats in our carburetors are VARNISHED, they are susceptible to damage when engine cleaners come into contact with them, as are fuel pump diaphragms, gaskets, check valves, and etc. Therefore, we do not recommend mixing any engine cleaner with the fuel in the fuel tank.

As noted in our owner's manuals, we only recommend the use of OMC "Engine Cleaner" in situations calling for the use of one.

Information concerning the proper usage of OMC "Engine Cleaner" can be found on the container. For additional information, reference can be made to SB-#964.

OMC "Engine Cleaner," which is available only from your parts distributor, will do no harm to our engines if it is used as directed.

REMEMBER:
DO NOT Mix engine cleaners with the Fuel!

NOTE: Post on your Miscellaneous index, under "Engine Miscellaneous."

JOHNSON MOTORS
N. Peter Hansen
Administrative Assistant
NPH:rs