Johnson Service Bulletin SB-1045 - Popping Open of Shroud Doors

Issued February 1965, this bulletin describes a shroud-door latch adjustment for early 1965 Johnson 33 and 40 H.P. outboards. It identifies washer 306407 and roller latch 377660.

Johnson Motors Service Bulletin letterhead

February, 1965

SUBJECT:POPPING OPEN OF SHROUD DOORS
ON ENGINES:ALL 1965 - 33 AND 40 H.P. MODELS

Due to the use of a new, thicker rubber seal around the shroud doors on 1965, 33 and 40 H.P. engines, some difficulty has been encountered in keeping these doors closed.

If you should be confronted with any of these early production engines on which the shroud doors persistently "pop" open, place one washer, P/N 306407, under each 377660 roller latch. This will cause the latch to extend 1/16" so as to compensate for the thicker seal. In some cases it may be necessary to bend the latch up slightly so that it is restored to its proper shape.

NOTE:Post on your RX, RXE, RD, RDS, and RK indexes, under "Miscellaneous".
JOHNSON MOTORS
N. Peter Hansen
Administrative Assistant
NPH:rs

Historical parts reference

306407 - Washer installed beneath each 377660 roller latch to compensate for the thicker shroud-door seal. Factory adjustment: 1/16 inch.