Johnson Service Bulletin SB-1048 - 90 H.P. Float Gauge

March 1965. Johnson introduced float gauge #380546 for setting the carburetor floats on 90 H.P. V4M engines. The original bulletin illustrates the measuring and adjustment procedure and includes a mail-order form for the tool.

Johnson Motors Service Bulletin letterhead
March, 1965

SUBJECT:   90 H.P. FLOAT GAUGE, PART NUMBER 380546.

ON ENGINES:  90 H.P., V4M ENGINES

Factory photograph of Johnson float gauge 380546
Fig. 1
Gauge inserted into carburetor float chamber
Fig. 2
Slotted gauge end used to bend float tang
Fig. 3

As you know, it is now necessary to make two measurements within the float chamber of the 90 horsepower carburetor to determine if the float is correctly set. We have recently released a carburetor float gauge which makes these multiple measurements unnecessary, materially shortening the time necessary to check float adjustment. The adjusting tool also has a slotted end to facilitate bending the float tang during adjustment.

1. Insert the gauge into the float chamber as shown in Figure 2. Hold the gauge so that the tang rests on the machined surface of the float chamber, while the edges of the gauge are flush against the top of the float and the float chamber.

CAUTION: Use only the weight of the float to seat the needle.

2. Adjustment is correct when the float just touches the float gauge as shown in Figure 2.

3. To change the float setting, insert the slotted end of the gauge over the tang as shown in Figure 3. When bending the tang, do so as close to the hinge pin as possible.

The float gauge is reasonable priced at only $.80 and is available from:

Outboard Marine Corporation Parts Depot
Galesburg, Illinois

PAGE 2SERVICE BULLETIN SB-#1048
JOHNSON MOTORS, DIVISION OF OUTBOARD MARINE CORPORATION, WAUKEGAN, ILLINOIS 60086

Do not order from Johnson Motors or from your Parts Distributor. Sorry, no C.O.D. orders will be accepted. Full remittance must accompany order. Make check or money order payable to: Outboard Marine Corporation. The price quoted is net F.O.B. destination.

JOHNSON MOTORS

N. Peter Hansen
Administrative Assistant

NOTE: Post on your Miscellaneous Index under "Special Tools."

NPH:rs

TO:  OUTBOARD MARINE CORPORATION PARTS DEPOT

Galesburg, Illinois

Gentlemen:

Please ship the following tools at the net unit price indicated.

My check/money order is enclosed.

PART NO.DESCRIPTIONQUANTITYUNIT PRICEEXTENSION
38054690 H.P. Carburetor
Float Gauge
$.80
SUB-TOTAL
Illinois Dealer's Add 4% Sales Tax
TOTAL