Johnson Service Bulletin SB-1087 - Inner Exhaust Cover

Issued April 16, 1966, this bulletin recommends an updated inner exhaust cover and associated hardware for 100 HP V4ML-12 outboards built before serial number 2691738.

Johnson Motors Service Bulletin factory letterhead
April 16, 1966
SUBJECT:INNER EXHAUST COVER
ON MODELS:V4ML-12, 100 HP ENGINES

An Engineering Change has recently been processed recommending that the 308669 Inner Exhaust Cover from the 80 HP engine be used as a substitute for the inner exhaust cover presently being used on 100 HP engines. This change concerns all 100 HP engines prior to Serial Number 2691738 and in no way affects the performance of the engine.

We strongly recommend that this change be incorporated into all 100 HP engines that come into your shop for service. The parts mentioned in the following procedure are necessary when making this change:

  1. Remove exhaust cover and disassemble heat exchanger assembly.
  2. Replace present inner exhaust cover with 80 H.P. cover, part #308669 and Gasket #308671. Reassemble heat exchanger assembly, using an additional spacer, part #308701 (exhaust deflectors will not be used).
  3. Reassemble exhaust cover to powerhead, using a new #305176 Gasket.
JOHNSON MOTORS
N. Peter Hansen
Administrative Assistant

NOTE: Post on your V4M-100 HP Index under the heading "Powerhead."

Parts referenced in SB-1087

Application: Johnson V4ML-12, 100 HP engines before serial number 2691738. The factory procedure omits the exhaust deflectors when reassembling with the additional spacer.