Johnson Service Bulletin SB-1088: Spring Clip, Throttle Casing Guide

Issued April 1, 1966, this bulletin clarifies which spring clip should secure the throttle cable casing guide on Johnson V4M 90 and 100 horsepower engines. It distinguishes the clip supplied with the remote control assembly from the clip supplied in the engine tool kit.

Johnson Motors Service Bulletin letterhead

April 1, 1966

SUBJECT:   SPRING CLIP, THROTTLE CASING GUIDE

ON MODELS:   V4M, 90 AND 100 HP ENGINES

Factory photograph of spring clip 303226 on throttle casing guide
Figure 1
Factory photograph of spring clip 310729 on throttle casing guide
Figure 2

Reports from the field indicate that there is some confusion as to which of the two spring clips, that accompany the subject motors, to use to attach the throttle cable casing guide to the engine's throttle control shaft.

The 303226 Clip shown in Figure 1 is included with the remote control assembly package that is shipped with each of the subject engines.

The 310729 Spring Clip shown in Figure 1 is included in the tool kit that is shipped with each of the subject engines. Although the 310729 clip shown in Figure 2 is usable on engines of less horsepower, it is required on the 90 and 100 HP engines to eliminate the potential hazard of the throttle cable binding or coming unhooked from the engine.

Changes are in process so that only Spring Clip 310729 (Figure 2) will be shipped with 100 horsepower motors in the future, since this is the only correct spring clip to use on this engine.

JOHNSON MOTORS

N. Peter Hansen
Administrative Assistant

Historical parts reference

303226 - Spring clip supplied with the remote control assembly package. 310729 - Spring clip supplied with the engine tool kit and specified for 90 and 100 HP engines.

Archival reproduction of the original 1966 Johnson service instructions. Verify current service procedures before performing repairs.