Johnson SB-1102 - Operating in Fuel Saver Range

August 1966. Johnson Motors explained how to engage the Automatic Fuel Saver feature on 33 through 100 horsepower outboards by first reaching top RPM and then reducing the throttle approximately one-quarter.

Johnson Motors Service Bulletin letterhead
August, 1966
SUBJECT:  OPERATING IN FUEL SAVER RANGE

The Automatic Fuel Saver is a feature built into all Johnson
models from 33 through 100 Horsepower.

To obtain the economical advantage of this feature, it is necessary
that the throttle be fully advanced until top R.P.M. is reached,
then retarding approximately 1/4. This will close the throttle
slightly without retarding the spark (timing) resulting in a
noticeable decrease in fuel consumption. Advancing the throttle
to the same position from idle will not afford the same advantage.

JOHNSON MOTORS

Carl Klawonn
Administrative Assistant
CK:rs
NOTE:  Post under your Miscellaneous Index under the heading
       "Engine Miscellaneous".

Historical reference

Johnson Motors Service Bulletin SB-1102, August 1966. The original factory wording is reproduced above. This historical procedure is specific to the engines covered by the bulletin.