Johnson Service Bulletin SB-1105 - Carbon Deposits

Issued September 1966, this bulletin reminds Johnson dealers that carbon accumulation can cause reduced power, poor acceleration, and low top RPM even after a tune-up. It recommends inspecting engines after two seasons of service and points to a forthcoming carbon-removal service promotion bulletin.

Johnson Motors Service Bulletin letterhead

September, 1966

SUBJECT:   CARBON DEPOSITS - POWER & PERFORMANCE ROBBER

ON MODELS: ALL MODELS

Loss of power, poor acceleration and low top R.P.M. can very often be caused by excessive carbon build-up on pistons, cylinder heads and in the exhaust ports.

Too frequently, we hear of sick running engines even after a so called "complete tune-up" has been performed. The possibility of excessive carbon should definitely be checked after two seasons of service, especially in the case of the V's.

Inspection for carbon build-up can best be accomplished by removing the cylinder head. Since the cylinder head must be removed for decarbonizing, you will already be one step ahead should carbon removal be necessary. Be certain to use new gaskets upon reassembly, tightening the cylinder head bolts to the specified torque.

In conjunction with this bulletin, we are preparing a Service Promotion Bulletin, #SPB-385, which outlines a fast, efficient and profitable method of carbon removal.

JOHNSON MOTORS
Carl Klawonn
Administrative Assistant

CK:rs

NOTE: Post on all Indexes under the heading "Powerhead".

Related factory publication

SPB-385 - Carbon removal method referenced in SB-1105. This bulletin describes SPB-385 as being prepared at the time of publication.