SB-1114 - Change in Fuse Size

November 1966. Johnson Motors directed dealers to replace the original 20-amp voltage regulator lead fuse with a 30-amp fuse on specified 80 and 100 H.P. engines and a 15-amp alternator conversion kit, and to correct affected parts catalogs.

Johnson Motors Service Bulletin factory letterhead

November, 1966 SB-1114

SUBJECT:   CHANGE IN FUSE SIZE

ON MODELS:   V4A-19R, 80 H.P., V4TL-13A, 100 H.P., AND
             15 AMP ALTERNATOR CONVERSION KIT

Since the printing of the 1967 outboard parts catalogs, a change has been made in the fuse located in the voltage regulator lead. This fuse, formerly an S.F.E.-20 amp (OMC Part #304980) has been changed to a 3AB-30 amp (OMC Part #510714). If any of the subject engines received to date have the 20 amp fuse, it should be removed and replaced with the 3AB-30 amp type. The "S.F.E. 20" marking on the fuse holder should be filed or ground off to avoid any confusion.

So that you may keep your catalogs current, we are listing below the various models, pages and item numbers affected:

ModelPageItemChange to Read:
V4A-19R1393510714 - Fuse - 3AB 30 amp
V4TL-13A1580510714 - Fuse - 3AB 30 amp
Accessories2520510714 - Fuse - 3AB 30 amp

JOHNSON MOTORS

Carl Klawonn

Administrative Assistant

CK:rs

NOTE:  Post on your V4-80 H.P., V4M-100 H.P. Indexes under the heading "Electrical".

Historical parts reference

Original fuse: OMC #304980, S.F.E.-20 amp. Replacement fuse: OMC #510714, 3AB-30 amp. The factory specified updating three catalog entries shown above.