Johnson Service Bulletin SB-1119 - Ignition Coil & Pulse Transformer Bracket

February 1967. Factory instructions for pre-forming bracket 312616 to reduce ignition component bracket breakage on 60, 80 and 100 HP engines.

Johnson Motors Service Bulletin letterhead
February, 1967 SB-1119
SUBJECT: IGNITION COIL & PULSE TRANSFORMER BRACKET #312616 ON MODELS: VX(L)-12M & 13A, VXH(L)-13A, 60 H.P. V4S(L)-19R & V4A(L)-19R, 80 H.P. V4TL-13A, 100 H.P.
The purpose of this bulletin is to advise you of the proper configuration and assembly procedure of the subject bracket. The first motors built used #312616 Brackets which were not pre-formed prior to assembly. The necessity of forming these brackets, as illustrated on the reverse side, is to pre-stress them to better absorb vibration and lessen breakage. We suggest this procedure be carried out on all 1967 motors listed which pass through your shop, or are in stock, if the serial numbers are prior to:
VX-12M ALL (Late 1966) VX-13A 2777284 VXL-13A 2746529 VXHL-13A 2742324 V4S-19R 2742506 V4SL-19R 2743282 V4AL-19R 2744811 V4TL-13A 2716972
Whenever replacing a broken bracket, assemble and form the new one as shown to insure long life.
JOHNSON MOTORS Carl Klawonn Administrative Assistant
CK:rs NOTE: Post on your VX-60 H.P., V4-80 H.P. and V4M-100 H.P. Indexes under the heading "Ignition". (Over)
SB-1119 factory page 2 showing battery ignition coil and power pulse ignition pulse transformer mounting bracket dimensions

Parts and applications reference

Bracket 312616; battery ignition coil 379596; sleeve 307768; power pulse ignition pulse transformer 381886. The original factory page above provides the bracket forming dimensions.