Johnson Service Bulletin SB-1137 - New Style Gearcase and Propellers

Issued July 1967, this bulletin introduces a redesigned lower-unit gearcase and matching propellers for Johnson 15, 18 and 20 HP outboards. The revised propeller must accompany installation of the new gearcase.

Johnson Motors Service Bulletin letterhead
SB-1137

July, 1967

SUBJECT: NEW STYLE GEARCASE AND PROPELLERS

ON MODELS: FD(L)-10 thru 21R - 15, 18 and 20 H.P.
FDE(L)-10 thru 12 - 15 and 18 H.P.

A new style gearcase has been produced for use on 15, 18 and 20 H.P. Models. Current production units are now being equipped with this gearcase.

It is designed with a streamline configuration which will give superior structural strength. It will take harder knocks and perform better in weedy waters.

Factory comparison of new and old style Johnson gearcases
NEW STYLE     OLD STYLE

NEW STYLE PART NUMBERS

Part No.DescriptionFor use on
382831Gearcase Assembly CompleteFD(L)-14 thru FD(L)-21R
382832Gearcase, Bearing & Pin AssemblyFD(L)-10 thru FD(L)-21R
FDE(L)-10 thru FDE(L)-12

NOTE: Part No. 382832 is also used as a replacement Gearcase, Bearing and Pin Assembly on Models QD(L)-16 thru QD(L)-18H. These new style gearcases are being supplied as replacement parts for all the above models.

PROPELLERS

In conjunction with this new gearcase, P/N 379717, 381801 and 592959 Propellers have been improved. This improvement consists

PAGE 2    SERVICE BULLETIN SB-1137
JOHNSON MOTORS, DIVISION OF OUTBOARD MARINE CORPORATION, WAUKEGAN, ILLINOIS 60085

of a new style bushing plus design changes to the propeller which provide a tighter fit between gearcase and propeller.

Old style propeller with three hub notches
OLD STYLE

Old and new style propellers are easily identified. OLD STYLE have 3 notches on the leading edge of hub. NEW STYLE do not have notches.

Whenever a new style gearcase is installed in place of an old style, a new style propeller must be installed. An old style propeller on a new style gearcase reduces the effectiveness of the design in protecting the propeller shaft seal against fish line wrap-up.

Old style propellers that you have in stock can be used up as replacement parts on engines equipped with the old style gearcase. All propellers received in the future will be of the new style.

JOHNSON MOTORS
Carl Klawonn
Administrative Assistant

CK/rkm

NOTE: Post on your QD-10 H.P. and FD-15, 18 & 20 H.P. Indexes under the heading "Lower Unit".

Historical parts reference

382831 - Complete new-style gearcase assembly. 382832 - Gearcase, bearing and pin assembly. 379717, 381801, 592959 - Propellers updated for the new gearcase.

Factory caution: old-style propellers are not suitable for installation with the new-style gearcase.

1960s service bulletin archive