Johnson Service Bulletin SB-1138 - Fuel Pump (July 1967)

Johnson identified a fuel delivery problem affecting VX and VXH 60 HP outboards when operating under sustained load. This bulletin identifies an improved pump and lists the spring changes available for earlier pumps.

Johnson Motors Service Bulletin letterhead

July, 1967

SUBJECT:   FUEL PUMP

ON MODELS:   VX, VXH - 60 H.P.

Recent field reports have disclosed a fuel pump problem that may be encountered on 60 H.P. models.

It seems that when operated on a heavy boat or when pulling water skiers, some of these engines will begin to die out if the engine is held at 1000 to 3000 RPM for 30 seconds to one minute. At this point, if the engine is accelerated, it has a tendency to hesitate or falter or may even stop completely, due to lack of fuel.

To overcome this problem, a new fuel pump (Part No. 382563) has been developed. Current production of 60 H.P. motors are equipped with a new fuel pump; however, early 1967 models have the old style fuel pump. New style pumps can be identified by the number "6" stamped on the casting.

Any 60 H.P. in the field can be modified by installing a new style air dome spring and a new style diaphragm spring.

NEW STYLEOLD STYLE
Air Dome Spring304486305183
Diaphragm Spring305182310490

These new springs allow a more uniform fuel supply to the carburetor in the 1000 to 3000 RPM range thus eliminating the problem mentioned above.

JOHNSON MOTORS
Carl Klawonn
Administrative Assistant

CK/rkm

NOTE:   Post on your VX 60 H.P. Index under the heading
       "Carburetion".

Historical parts reference

The improved pump is 382563. Replacement air dome spring 304486 supersedes the earlier spring 305183 for this modification. Replacement diaphragm spring 305182 replaces 310490 in the bulletin's comparison. These are 1967 factory instructions; verify compatibility and current service information before performing repairs.