
August, 1967
SUBJECT: 9½ H.P. REMOTE CONTROL ADAPTOR KIT
ON MODELS: MQ-10S thru 13 - 9½ H.P.
We recently discovered that the subject kit, although indicated for all 9½ H.P. models, is not adaptable to the 1964, MQ-10S or 1965, MQ-11C models. The reason it is not adaptable is due to interference between the new throttle linkage and the existing slow speed linkage.
To compensate for this interference, a simple modification must be made to the 1964 and 1965 models. The slow speed linkage and related parts as shown in Figure 1 must be removed.

Figure 1
Of these parts, the following are required for the modified hook-up: Choke Knob; 1 - E-ring; 1 - Plastic Sleeve; Bow Washer; and Packing Nut. In addition, 1 - 381000 Needle and Shaft Assembly and 1 - 312164 Spring are needed.
Re-assembly of the slow speed adjustment should be made in accordance with Figures 2 and 3. The original packing nut and #381000 needle are installed simultaneously. Then, install one E-clip and Bow Washer as illustrated (Figure 2) and insert the flexible
