Johnson Service Bulletin SB-1142 - Die Cast "Scars" Mistaken for Cracks

Issued in August 1967 for all models, this bulletin cautioned dealers that harmless marks from the die-casting process could resemble cracks. Johnson advised careful inspection before replacing parts or submitting warranty claims.

Johnson Motors Service Bulletin letterhead

August, 1967

SUBJECT:   DIE CAST "SCARS" MISTAKEN FOR CRACKS

ON MODELS:   ALL

Factory photograph of a die-cast engine component with arrows identifying casting scars

Referring to the accompanying photograph, you will note the die casting "scars" indicated. Such "scars" are caused in the die casting process.

Many dealers assume that these "scars" are cracks or defects in the part, and without making a thorough inspection of the part, they often replace it and submit a warranty claim. Naturally, such claims are not justified.

We would like to stress the fact that it is the dealer's responsibility to carefully inspect all such parts prior to replacing them. A careful inspection will usually reveal whether a part is actually cracked or whether it is merely die "scarred".

JOHNSON MOTORS

Carl Klawonn

Administrative Assistant