Johnson Service Bulletin SB-1152

January 1968. Johnson explains the positive-open choke spring on 55 H.P. TR(L)-10 outboards and its role in preventing unwanted choke closure at full throttle.

Johnson Motors Service Bulletin letterhead

January, 1968

SUBJECT:   THROTTLE LEVER SPRING FOR POSITIVE OPEN CHOKE

ON MODELS:   TR(L)-10, 55 H.P.

The subject spring, installed on the center carburetor throttle lever, prevents the choke from closing during full throttle operation.

When not in use, this spring looks as though it does not serve any useful purpose and might suggest a missed operation during assembly (Figure 1).

Figure 1: spring in idle or slow speed throttle setting
Figure 2: spring in full throttle setting

By simply advancing the throttle to full open position, one can readily see the purpose and operation of the spring and how it applies enough pressure against the choke linkage to maintain full open choke (Figure 2).

Especially in rough water conditions, the choke valves have a tendency to flutter causing an intermittent rich fuel mixture. The result is a surging or ragged high speed operation.

The part number of this spring is 314807 and is illustrated on page 11, item #57 of your 55 H.P. parts catalog.

JOHNSON MOTORS

Carl Klawonn
Administrative Assistant

CK/rkm