Johnson Service Bulletin SB-1163 - AC-V40FFS Spark Plug

Issued June 1968, this bulletin explains Johnson's recommendation to use Premium 50-1 Outboard Oil with the AC-V40FFS extended-reach surface-gap spark plug on 100 H.P. V4TL-13 and V4TL-14 engines to help preserve improvements in mid-range ignition performance.

Johnson Motors Service Bulletin factory letterhead

June, 1968

SUBJECT:   USE OF AC-V40FFS SPARK PLUG P/N 383647

ON MODELS:  V4TL-13 & 14, 100 H.P.

You were recently advised in Service Bulletin SB-#1159 of the new AC-V40FFS extended reach surface gap spark plug for use in the above models. The use of this plug was recommended to correct engines that had a tendency to misfire during mid-range operation.

Further testing has proven that to retain the benefits derived through the use of AC-V40FFS plugs, Johnson Premium 50-1 Outboard Oil should be used due to its clean burning characteristics. Other oils may tend to cause an accumulation of carbon resulting in possible pre-ignition thus overcoming acquired benefits of the AC-V40FFS plugs.

In addition to using the new spark plugs combined with the use of Johnson Oil, correct propeller selection, as with any engine, is a must for optimum performance.

JOHNSON MOTORS Carl Klawonn Administrative Assistant

CK/rkm

NOTE:  Post on your VM-100 H.P. Index under the heading "Ignition".

Historical references

Part number 383647: AC-V40FFS extended-reach surface-gap spark plug.

Related bulletin: SB-1159, the earlier recommendation for this spark plug. The 1968 bulletin additionally recommends Johnson Premium 50-1 Outboard Oil and proper propeller selection.