Johnson Service Bulletin SB-1180 - Fuel Connector, Hose and Primer Bulb Assembly

Issued February 1969, this bulletin identifies the yellow-banded fuel hose required for 85 and 115 H.P. engines and corrects a stern drive parts catalog O-ring listing.

Johnson Motors Service Bulletin factory letterhead

February, 1969

SUBJECT:#383721 FUEL CONNECTOR, HOSE AND PRIMER BULB ASSEMBLY

ON MODELS:   ALL MODELS

Several questions have been asked concerning the use of the sub-
ject gas hose which is presently being supplied with the current
85 H.P. and 115 H.P. models.  This fuel hose can be identified by
a yellow band.

The fuel connector, hose and primer assembly #377433 with no
banding or with the red band, can be used on all models except
the 85 H.P. and 115 H.P.

The fuel connector, hose and primer bulb assembly #383721 has new
nipple and valve assemblies, #383719 and #383720, with larger fuel
passages which must be used on the 85 H.P. and the 115 H.P. models
and can be used on all other models.

To facilitate the testing of all models, your test tank should be
equipped with the yellow banded fuel hose #383721.
JOHNSON MOTORS

D. J. Cankar
Administrative Assistant

DJC:rm

NOTE:   Kindly refer to your 1969 Stern Drive Parts Catalog #383857
       item 15, page 54 and 55 - should read 302337 O'ring instead
       of 302377 as published. This also appears in your 1968
       Stern Drive Parts Catalogs.

Post on all Indexes under the heading "Miscellaneous."

Historical parts references

#383721 - yellow-banded fuel connector, hose and primer bulb assembly for 85 and 115 H.P. engines, also suitable for other models.

#377433 - earlier hose assembly, not for 85 or 115 H.P. models.

#383719 and #383720 - nipple and valve assemblies with enlarged fuel passages.

Stern drive parts catalog correction: #302337 O-ring replaces the erroneous #302377 listing.