Johnson Service Bulletin SB-1186 (March 1969)

Johnson identified loose contact at the ignition fuse holder as a cause of intermittent ignition failure or failure to start on certain 1969 85 HP and 115 HP outboards. This bulletin introduces a redesigned fuse holder cap, part 384297, identified by a red dot.

Johnson Motors Service Bulletin letterhead

March, 1969

SUBJECT:INTERMITTENT OR TOTAL OPEN CIRCUIT IN IGNITION SYSTEM
ON MODELS:1969, 85 H.P. and 115 H.P.

Due to recent tests and field experience of the 85 and 115 horsepower motors which are missing or not starting at all, we have found the trouble to be caused by a loose fuse in the fuse holder. To correct this situation, we have redesigned the cap of the fuse holder to eliminate the excess tolerance. If you have an 85 horsepower built prior to serial number 3030761 or a 115 horsepower built prior to serial number 3040691, please advise us by giving the model and serial number. Then we will send you a new Fuse Holder Cap, part number 384297.

The redesigned fuse holder cap can be identified by a red dot on the end.

JOHNSON MOTORS
Doug Cankar
Doug Cankar
Administrative Assistant

DC:rkm

NOTE:  Post on your 85 and 115 H.P. Indexes under the heading "Ignition."

Historical service reference

Fuse Holder Cap: 384297. Applies to 1969 Johnson 85 HP engines built before serial 3030761 and 115 HP engines built before serial 3040691. The replacement cap is marked with a red dot.