Johnson Service Bulletin SB-1194 (May 1969)

Johnson's instructions for modifying the extra port-side trailing lock supplied with early-production 1969 85 HP and 115 HP outboard motors when reduced tilt clearance interferes with a boat's transom or motor well.

Johnson Motors Service Bulletin factory letterhead

SUBJECT:  EXTRA TRAILING LOCK, PORT, WITH REDUCED TILT ANGLE

ON MODELS:  Early Production 1969 - 85 H.P. and 115 H.P. Engines

Factory drawing of port-side extra trailing lock, indicating 1/16 inch to file inward from dotted line

We have been advised by Engineering Department that the extra trailing lock, port, being packed in the owner's kit on early production 1969 - 85 H.P. and 115 H.P. motors should have a change.

When the occasion arises to install one of the subject trailing locks, port, with the reduced tilt angle on boats having a transom and motor well design that will not allow the motor to tilt high enough to utilize the tilt lock provided, should have the following change.

The extra trailing lock should be filed in 1/16" from the dotted line as illustrated, before installing on the motor.

JOHNSON MOTORS

Doug Cankar
Administrative Assistant

DC:rm

NOTE:  Post on your 85 H.P. and 115 H.P. Indexes under the heading "Lower Unit."

Historical service reference

SB-1194: Extra Trailing Lock, Port, with Reduced Tilt Angle. Issued May 1969 for early-production Johnson 85 HP and 115 HP engines. The factory illustration identifies a 1/16-inch filing modification to improve motor tilt clearance on affected installations.