Johnson Service Bulletin SB-1201 - Rectifier Failures

Issued July 1969 for 85 HP and 115 HP Johnson outboards, this bulletin explains how rectifier leads can be pinched by a mounting bracket and describes the factory correction.

Johnson Motors Service Bulletin letterhead

July, 1969

SUBJECT:   RECTIFIER FAILURES - P/N 580795 and 580765

ON MODELS:  1969 - 85 H.P. and 115 H.P.

Original factory photograph of rectifier mounting showing BOSS and RIBS labels

Some rectifier failures have been traced to the leads being pinched between the rectifier housing and mounting bracket P/N 315001. The rectifier would test "OK" off the bracket but would be shorted to ground when installed.

To eliminate this possibility, it will be necessary to lower the boss height, making it level with or below the mounting bracket ribs, indicated in the illustration.

Recently a change has been made to the mounting bracket, in production, to this effect.

JOHNSON MOTORS

Doug Cankar

Administrative Assistant

DC:rm

NOTE:  Post on your 85 H.P. and 115 H.P. Indexes under the heading "Ignition".

Historical reference

This bulletin identifies rectifier part numbers 580795 and 580765 and mounting bracket 315001. The original annotated factory photograph is retained for identification.