Issued in September 1969, Johnson Service Bulletin SB-1206 explains a thicker cylinder head washer for 1969 and 1970 20 and 25 H.P. outboards, intended to prevent cracking of cylinder head bosses during assembly.

Johnson Motors Service Bulletin letterhead

September, 1969

SUBJECT:CRACKS IN CYLINDER HEAD
ON MODELS:1969 and 1970 - 20 H.P., 25 H.P.

We have received several reports of cracked cylinder head bosses. We have found this to be caused by collapsing of the washer (P/N 306453) beneath the cylinder head screw while the head is being torqued. To stop this problem we are now using a 1/32" thicker washer (P/N 308419) in production. We recommend that, should you have the cylinder head removed for service, the thicker washers be used in reassembly. Please change your 1969 and 1970 Parts Catalogs to reflect this change.

H.P.PAGEITEM NO.CHANGE TO READ
20J939308419
25J939308419
JOHNSON MOTORS
Doug Cankar
Administrative Assistant

DC:rm

NOTE:  Post on your 20 H.P. and 25 H.P. Indexes under the heading
      "Powerhead".

Historical reference: This bulletin changes the cylinder head washer listed as item 39 on page 9 of the 1969 and 1970 20J and 25J parts catalogs. The earlier washer is #306453; the replacement is #308419.