Johnson Service Bulletin SB-1208 - Flywheel Hitting Sound Blanket

Issued September 1969 for model 60ES70B. Johnson documented a motor-cover insulation clearance correction and supplied a full-size cutting template on the second page.

Johnson Motors Service Bulletin letterhead

September, 1969

SUBJECT:  FLYWHEEL HITTING SOUND BLANKET

ON MODEL:  60ES70B

Complaints of the flywheel hitting the sound blanket in the motor cover have prompted an investigation into this problem resulting in an Engineering Change and the following service procedure:

Factory photograph showing the sound blanket area to remove and placement of the cutting template

A.  Cut out the template furnished with this bulletin.

B.  Position the template, as illustrated.

C.  Cut and remove the sound blanket only between the dotted lines as indicated on the template.

JOHNSON MOTORS

Doug Cankar
Administrative Assistant

DC:rm

NOTE:  Post on your 60 horsepower Index under the heading "Miscellaneous".

SB-1208 original page 2 full-page factory cutting template with dotted removal boundaries

Historical service reference

Model: Johnson 60ES70B. Issue: flywheel interference with motor cover sound blanket. Remedy: position the supplied template and remove only the insulation indicated by its dotted lines.

The template is reproduced as an original scanned page for archival reference. On-screen and printer scaling may change its physical dimensions; do not assume a printed copy is at factory scale.