
September, 1969
SUBJECT: PREMATURE OPERATION OF HOT LIGHT
ON MODELS: 1969 - 85 H.P. and 115 H.P.


Recent reports have disclosed the hot lights of some 1969, 85 and 115 horsepower engines coming on when the engine is really not overheated at all. It seems that when engine is operated, enough heat is conducted in the wide solid water cavity section in the cylinder head area of the heat sensor causing the switch to close even though the cooling system temperature is normal.
To overcome this condition, it is necessary to lower the temperature of the area adjacent to the temperature switch cavity. This is accomplished by drilling a 3/16 inch diameter hole at an approximate 45 degree angle as shown in Figure 1 and 2. This hole allows water to flow through the problem area, thus cooling it. When drilling the 3/16
