Johnson Service Bulletin SB-1218, issued November 1969, recommends Type "D" lubricant in distributor-cap high-tension towers to prevent electrical arcing to the stator on C.D. ignition models.

Johnson Motors Service Bulletin factory letterhead

November, 1969

SUBJECT:PREVENTING ARCING OUT OF THE HIGH TENSION TOWERS TO
THE STATOR
ON MODELS:All C.D. Ignition Models

Recent field reports have disclosed an arcing out of the high tension towers of the distributor cap to the stator that may be encountered on C.D. ignition models.

To overcome this problem we strongly recommend applying type "D" lubricant generously to the inside of the high tension towers of the distributor cap. The towers should be filled at least 1/3 full. This will prevent arcing out of the high tension towers to the stator.

Type "D" lubricant can be purchased through your distributor under part number 172121 in 1/2 oz. tubes.

JOHNSON MOTORS

Doug Cankar
Administrative Assistant

DC:rm

NOTE:  Post on your C.D. Ignition Indexes under the heading
      "Ignition".