Johnson Service Bulletin SB-1220 (November 1969). Johnson introduced heavy-duty upper and lower motor mounts for 85 and 115 H.P. outboards, improving stability for high-speed use at the expense of greater vibration transmitted to the boat.
Johnson Motors Service Bulletin gray letterhead

November, 1969

SUBJECT:   HEAVY DUTY MOTOR MOUNTS

ON MODELS:  85 and 115 H.P.

Heavy duty upper and lower motor mounts are now available for the 85 and 115 horsepower motors. These mounts should be used where a greater degree of engine stability must be maintained such as when using the motor at speeds in excess of 60 m.p.h. Engine isolation from the boat will not be as great with the heavy duty mounts; therefore, an increase in transmitted vibration will be evident.

The heavy duty mounts are available from your Parts Distributor. Order by the following part numbers:

UPPER MOUNT - 384483
LOWER MOUNT - 384482
JOHNSON MOTORS

Doug Cankar
Administrative Assistant

DC:rm

NOTE:  Post on your 85 H.P. and 115 H.P. Indexes under the heading "Lower Unit."

Historical parts reference

384483 - heavy-duty upper motor mount; 384482 - heavy-duty lower motor mount. The bulletin recommends these for increased stability at speeds above 60 m.p.h. and notes increased transmitted vibration.