← Back to 1970-1980 OMC service bulletins

Evinrude Powerhead Service Bulletin #1037 - Silver Starflite Cylinder Head Screws

Issued February 1974, this bulletin instructs dealers to check cylinder head screw torque on specified 1974 Silver Starflite motors, particularly the three screws securing the voltage regulator to the port cylinder head. It lists the correct torque and affected serial-number range.

Evinrude Service Bulletin factory header
POWERHEAD #1037
February, 1974
CYLINDER HEAD SCREWS - SILVER STARFLITE
NOTE

We have recently been advised that there is a possibility that the Cylinder
Head Screws on the 1974 Silver Starflite motors may be low on torque.

We suggest that you retorque all cylinder head screws, especially the 3
screws holding the Voltage Regulator on the port side cylinder head.

The correct torque should be 168 - 182 inch lbs. or 14 to 16 ft. lbs.

Motors built within the following serial numbers should be checked.

135489 - 1000 to 135489 - 02670
EVINRUDE MOTORS
Service Department

Tools, supplies and related parts

Suggested products related to this service bulletin. Verify fit and suitability before ordering.

Amazon: tools and supplies

Digital Multimeter & Marine Electrical Connector Kit

Search for these supplies on Amazon

eBay: OMC / Evinrude OEM part 135489

Search for original or compatible replacement part 135489. Check the bulletin for supersessions and model fit.

Click here to search on eBay

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.