
We are recommending the following changes on 1973 & 1974 135 HP engines to prevent piston failures. Our investigation has shown that the octane number of some brands of regular fuel is lower than the 94 Research octane (89 posted octane) available in the past and is the cause of some powerhead failures. It is also possible, for economic reasons, the owner may purchase a lesser grade of fuel. If you have 1973 and 1974 engines which have had a piston failure (one that looks like the top has melted), low octane gasoline should be suspected as the cause.
If you have experienced this type of failure or if you are suspicious of the fuel in your area, we recommend the following changes on 1973-74 135 HP engines:
1973 135 HP use P/N 320502 (76C) in place of P/N 318657 (73C)
1974 135 HP use P/N 317488 (72C) in place of P/N 319776 (69C)
These jets are being installed on 1973-74 replacement carburetors and late 1974 production motors (1974 carburetors factory equipped with 72C jets can be identified by the number "72" stamped adjacent to the part number on the carburetor).
These changes will increase the fuel flow about .5 gallon per hour at W.O.T. (wide open throttle) but will provide an increased tolerance for low octane fuels.
Service Department