
CONTROLS #1049
May, 1974
LUBRICATION OF TILT TUBE OF ALL 1973-1974 50-135 HP MODELS
NOTE:
The installation instructions supplied with OMC Rotamatic steering systems
advise you to grease the end of the steering cable prior to installing the
cable into the engine tilt tube. Greasing the cable serves the dual purpose
of protecting both the steering cable and the I.D. of the tilt tube. If a
steering system other than OMC is used this greasing operation should still
be performed. Once the engine is put into operation, periodic regreasing is
required. In fresh water, regreasing should be done annually. In salt water
regreasing may be required as often as every 90 days. In addition, regreasing
should also be done if the unit is being put into storage for 30 days or more.
Always use OMC Sea Lube Anti-Corrosion lubricant for this service
operation.
EVINRUDE MOTORS
Service Department
Service Department