Back to service bulletins

Evinrude Lower Unit Bulletin #1075 - Leakage at Oil Drain/Fill Hole on Model 4506

March 1975 Evinrude lower-unit bulletin addressing oil drain and fill hole leakage on model 4506, serial numbers 4143 through 4362.

Evinrude Service Bulletin header
LOWER UNIT #1075
March, 1975
LEAKAGE AT OIL DRAIN/FILL HOLE ON MODEL 4506

It is possible that some model 4506 Evinrude Outboards with serial number 4143 through 4362 may leak gearcase lubricant from the oil drain/fill hole. The hole may not be tapped deep enough keeping the gasket on the plug from sealing.

When a 4506 comes in for service due to oil leaking from the drain/fill hole, check the threads for depth. Be sure to check for porosity in the casting, a missing seal washer, oversized (loose) threads or a cross threaded screw.

When it is determined that the lubricant seeping past the seal washer is due to an insufficient number of threads, order modified plugs from Evinrude Motors Service Department, P.O. Box 663, Milwaukee, Wisconsin 53201. A request sent on a quick letter or postcard is acceptable, however, be sure to include the model and serial number of the engine requiring shorter plugs.

Replace both plugs with the shorter ones obtained from us. The original plugs can be added to your inventory and used on other engines.

EVINRUDE MOTORS
Service Department