
We have had numerous inquiries concerning the suitability of the many new “super” or synthetic base lubricants appearing on the market. The only engine oils recommended for use in Evinrude outboards are those which are BIA certified TC-W (Two Cycle-Water cooled). These oils are formulated to give the best combination of engine performance and spark plug life coupled with the minimum possible combustion chamber deposits and piston varnish. We highly recommend Evinrude 50:1 Lubricant. This lubricant has been formulated with the needs of your customers’ Evinrude engine as the uppermost requirement.
The only gearcase lubricant currently recommended for use in our outboard gearcases is OMC Sea-Lube® Premium Blend Gearcase Lubricant. This lubricant replaces the older OMC Type “C” and OMC Sea-Lube® Gearcase Lubricant for this application. The only lubricants currently recommended for use in our power tilt or power tilt and trim systems are OMC Sea-Lube® Gearcase Lubricant or Dexron Automatic Transmission Fluid. Do not use Hypoid oil, 90W General Purpose Gear Lube or any other non-authorized lubricant in Evinrude gearcases, tilt units or trim and tilt units.
The use of engine oils and gearcase lubricants other than those recommended by Evinrude may result in loss of warranty on that particular unit.
NOTE: This bulletin replaces Lubrication #1006.
Service Department