Back to 1970s OMC service bulletins

Evinrude Service Bulletin #1093 - 1975 70 HP Identification Plates

Issued July 1975, this bulletin identifies a production labeling error affecting some 70 HP engines. Certain mechanical-shift E-series engines were incorrectly fitted with B-series model plates, potentially causing incorrect replacement parts to be ordered.

Evinrude factory bulletin header
MISCELLANEOUS #1093
July, 1975
1975 70 HP ENGINES WITH INCORRECT IDENTIFICATION PLATES

As you know, we made a running change to the gearcase design of the 1975 70 HP engines. The first series, identified by the suffix letter “B” in the model number (as in 70573B) have a hydraulically assisted shift mechanism. The second series, identified by the suffix letter “E” in the model number (as in 70573E) have a pure mechanical shift gearcase.

We recently learned that a quantity of second series “E” models were incorrectly equipped with model/serial plates indicating they were first series “B” models. This could result in confusion when ordering service parts. Engines which have an incorrect model/serial plate fall within the following serial number block:

Model NumberSerial Number Block
7057314258 through 15901

If you had been shipped one of these engines, you would have been notified by certified mail and supplied with model number plates to be laid over the original plate. The model number overlay has a hole so that the serial number from the original plate can be seen.

If a 1975 70 HP engine falling within the serial number block shown above is brought into your shop, check the suffix letter. If it is “B”, it is incorrect and the model number overlay should be installed. Contact the Evinrude Service Department at once for further information.

(over)
The pictures below show several of the easily identifiable differences between a “B” series and an “E” series model are included for your reference.
EVINRUDE MOTORS
Service Department
Factory photograph of 1975 70 HP B-series outboard
1975 70 HP “B” SERIES
Factory photograph of 1975 70 HP E-series outboard
1975 70 HP “E” SERIES

Tools, supplies and related parts

Suggested products related to this service bulletin. Verify fit and suitability before ordering.

Amazon: tools and supplies

Adhesive / Decal Remover Solution & Plastic Razor Scraper

Search for these supplies on Amazon

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.