Back to 1970s OMC service bulletins

Evinrude Accessories Bulletin #1105

Availability and installation guidance for complete OMC power trim and tilt cylinder assemblies, including parts 172667, 172822, and 172839.

Evinrude factory service bulletin header
ACCESSORIES #1105
October, 1975
AVAILABILITY OF COMPLETE TRIM/TILT CYLINDERS

Part No. 172667, Trim Cylinder Assembly
Part No. 172822, Tilt Cylinder Assembly

Trim and Tilt cylinder assemblies are now available for all OMC Power Trim and Tilt units. Part No. 172667 (suggest list price $61.25) and 172822 (suggested list price $69.99) are complete assemblies ready for installation.

The 1976 Accessories Parts catalog and Master Parts price list will include these two assemblies.

Prior to the installation of tilt cylinder, check the end fittings on hydraulic hose running between pump and tilt cylinder. If fittings are aluminum or stainless steel, tilt and trim is early design. On these units, installation of the tilt cylinder will be easier if you use P/N 172839 hose, elbow and O-ring kit. If an early design hydraulic hose is used, the end cap of tilt cylinder must be removed to assemble hose to cylinder. This operation is not necessary if P/N 172839 kit is used.

Please refer to Evinrude Service Bulletin Accessories #1086 for service tips and troubleshooting procedures. Additional copies can be obtained by contacting Evinrude Motors Service Department.

EVINRUDE MOTORS
Service Department