Evinrude Service Bulletin #1109: New OMC Hi-Vis Gearcase Lubricant

1976 Evinrude bulletin introducing OMC Hi-Vis lubricant, specifying gearcase compatibility and four packaging part numbers.

Evinrude Service Bulletin header
LUBRICATION #1109
January, 1976
NEW OMC HI-VIS GEARCASE LUBRICANT
OMC Hi-Vis gearcase lube is a new lubricant now available from your Parts Distributor. Hi-Vis gearcase lube is similar to OMC Premium Blend except that it has a higher viscosity. This higher viscosity gives a greater film strength which, in turn, gives increased protection under high bearing and gear load conditions such as those which occur in the 200 H.P. gearcase. Hi-Vis gearcase lubricant is being used in the initial factory fill-up on all 200 H.P. models and should be used whenever lubricant is added or replaced.
The higher viscosity of this new gearcase lube makes it desirable for use in lesser horsepower engines which are subject to heavy-duty usage. OMC Hi-Vis lube should not be used in older models built between 1962 and 1972 which had electrically actuated shift mechanisms. All electric shift models (outboard or stern drive) require OMC Premium Blend lube to shift properly, particularly in cold weather. OMC Hi-Vis gearcase lube is recommended for all 1973-76 outboards and any 1972 or earlier outboard which has a mechanical shift gearcase. Hi-Vis gearcase lube is compatible with Premium Blend. This means it can be used (where recommended) to top off a gearcase currently filled with Premium Blend.
OMC Hi-Vis gearcase lubricant can be obtained from your parts distributor under the following part numbers:
PART NUMBERQUANTITY & SIZE
173241Case of twelve - 11 ounce tubes
173242Case of twelve - 16 ounce tubes
173243One - 1 gallon can
173244One - 5 gallon can
EVINRUDE MOTORS
Service Department