
A change was made to the motor cable assembly on the 55, 70 and 75 H.P. for 1976 which removed the purple lead from these assemblies. This lead provided switched B+ for the regulator in the subject kits and without it the regulator does not function; i.e., the battery could get too much current. For long periods of running this could result in overcharging and possible damage to the battery; therefore, when these kits are installed on these engines, a purple 16 ga. lead should be connected from the ignition switch “ACC” terminal to the #4 terminal on the 55 H.P. terminal board and the #6 terminal on the 70 and 75 H.P. terminal board.
The lead that was removed from the motor cable assemblies on subject motors will be included in 1977 and later models.
Service Department