Evinrude Service Bulletin #1117: ENGINE OVERHEATING ON 1976 35 H.P. MODEL

Reports of overheating on 1976 35 HP outboards under heavy aquatic vegetation conditions. Published March, 1976.

Evinrude Service Bulletin
LOWER UNIT #1117
March, 1976
ENGINE OVERHEATING ON 1976 35 H.P. MODEL
We have received several reports from the field that, under certain conditions, the 1976 35 H.P.
can overheat causing powerhead damage. This has occurred even after installing a P/N 388147
or 388148 Cooling System kit.
A careful study by our Engineering Department has shown that this problem can occur when
operating in waters with heavy hyacinth growth, pepper grass or other aquatic weeds or grass.
Under these circumstances there is the possibility of an insufficient volume of water being
circulated from the water pump to the powerhead.
If you have 35 H.P. motor owners who have experienced overheating problems and who operate
in waters with heavy marine growth as described above, please contact the Evinrude Service
Department. We will supply you with a modified impeller housing and instructions for drilling
several additional water intake holes in the gearcase.
▣   NOTE:
EVINRUDE MOTORS
Service Department

Tools, supplies and related parts

Suggested products related to this service bulletin. Verify fit and suitability before ordering.

Amazon: tools and supplies

Marine Water Pump Impeller Kit & Infrared Thermometer Gun

Search for these supplies on Amazon

eBay: OMC / Evinrude OEM part 388147

Search for original or compatible replacement part 388147. Check the bulletin for supersessions and model fit.

Click here to search on eBay

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.