Evinrude Service Bulletin #1166: 1978 V-4 Flywheels

This December 1977 ignition bulletin explains how to identify 1978 V-4 flywheels and why they must not be interchanged with earlier models.

Evinrude Service Bulletin header

IGNITION #1166

December 1977

SUBJECT:   1978 V-4 FLYWHEELS

The flywheels on 1978 85 to 140 H.P. motors are similar in appearance to earlier V-4 flywheels but are not interchangeable. The 1978 flywheels contain larger and higher powered magnets and will cause overheating and failure of the stator assembly if used on 1977 and earlier motors. Conversely, using 1977 flywheels on 1978 motors will not produce sufficient voltage for smooth running.

The 1978 V-4 flywheels may be identified by the “CD 4” stamped on the underside between the magnets and the hub.

EVINRUDE MOTORS
Service Department

Tools, supplies and related parts

Suggested products related to this service bulletin. Verify fit and suitability before ordering.

Amazon: tools and supplies

Universal Flywheel Puller Kit & Valve Lapping Compound

Search for these supplies on Amazon

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.