← Back to 1970-1980 OMC service bulletins

Evinrude Accessories Bulletin #1169 - Permatex Gel-Gasket

January 1978 factory advisory explaining why Permatex Gel-Gasket must not be substituted for OMC Gel-Seal (P/N 322702 or P/N 324073) on Evinrude engine sealing applications. The warning identifies a risk of improper cylinder-to-crankcase sealing and refers to Service Promotion Bulletin #229.

Evinrude Service Bulletin factory letterhead
ACCESSORIES #1169
January, 1978
SUBJECT: PERMATEX GEL-GASKET

It is our understanding that recently Permatex has been including a sample of Gel-Gasket with their package of Permatex #2.

Inasmuch as Permatex's Gel-Gasket name is very similar to the OMC Gel-Seal (P/N 322702, 1.7 Fl. Oz. and P/N 324073, 6 c.c.) recommended for use on our engines as a gasket eliminator in certain applications, we feel it is possible that a substitution of Gel-Gasket for the recommended and approved OMC Gel-Seal might be made in the field by Servicing Dealers.

Please be informed that Gel-Gasket as offered by Permatex is NOT an approved substitute for applications calling for OMC Gel-Seal.

NOTE
Permatex Gel-Gasket is not recommended or approved by Marine Engineering in that the filler in Gel-Gasket can result in a shimming action between the cylinder and crankcase thereby making an improper fit of the internal bearing and seals which would be out of specifications resulting in possible engine malfunction.
(Cross Reference Service Promotion Bulletin #229, 3-7)
EVINRUDE MOTORS
Service Department