← Back to 1970-1980 OMC service bulletins

Evinrude Tools Bulletin #1184 - Lifting 1978 V-4 & V-6 Outboards

Issued in April 1978, this Evinrude service bulletin cautions technicians that lifting 1978 V-4 and V-6 outboards with certain hoists can crack their new plastic exhaust housing covers. It recommends the supplied lifting brackets or Lifting Eye Tool P/N 321537.

Evinrude Service Bulletin factory letterhead
TOOLS #1184
April, 1978
SUBJECT:   LIFTING 1978 V-4 & V-6 OUTBOARDS

The 1978 V-4 and V-6 outboard models are using new plastic exhaust housing covers underneath lower motor cover instead of the aluminum type which have been used in past years. Because of this, problems can develop when lifting these motors with certain hoists. Shop hoists that use parallel arms under motor cover for lifting can cause cracks and breakage of these covers. We are recommending that only the lifting brackets supplied with the motor or the Lifting Eye Tool P/N 321537 be used when lifting these motors.

EVINRUDE MOTORS
Service Department

Tools, supplies and related parts

Suggested products related to this service bulletin. Verify fit and suitability before ordering.

Amazon: tools and supplies

Universal Outboard Flywheel Lifting Eye Ring Tool

Search for these supplies on Amazon

eBay: OMC / Evinrude OEM part 321537

Search for original or compatible replacement part 321537. Check the bulletin for supersessions and model fit.

Click here to search on eBay

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.