Evinrude Service Bulletin #1202

September 1978 Evinrude service bulletin explaining how to reassemble separated integral tilt and trim check valves, part numbers 387376 and 387517.

Evinrude Service Bulletin header
ACCESSORIES #1202

September, 1978

SUBJECT: SEPARATION OF “INTEGRAL” TILT & TRIM CHECK VALVES

Occasionally check valves P/N 387376 or 387517 will fall apart when they are removed from the manifold. These valves are not damaged and should be reassembled by pressing parts back together in the order shown in the accompanying photograph.

It is recommended that parts be pressed together using a vise equipped with soft jaws or a small arbor press.

NO WARRANTY CREDIT WILL BE GIVEN FOR VALVES THAT HAVE SEPARATED WHERE NO OTHER DEFECTIVE CONDITION EXISTS.

Factory technical illustration for bulletin 1202

Tools, supplies and related parts

Suggested products related to this service bulletin. Verify fit and suitability before ordering.

Amazon: tools and supplies

Marine Power Trim & Tilt Hydraulic Fluid & Spanner Wrench

Search for these supplies on Amazon

eBay: OMC / Evinrude OEM part 387376

Search for original or compatible replacement part 387376. Check the bulletin for supersessions and model fit.

Click here to search on eBay

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.