Evinrude Service Bulletin 1261 - Improved Bearing and Gear Kits

Issued May 1980, this bulletin details replacement bearing and gear kits for 1960 through 1979 18, 20 and 25 HP outboards, and explains the use of special gearcase assembly tool 390880.

LOWER UNIT #1261
May, 1980

Subject: Improved Bearing and Gear Kits / Special Tool P/N 390880

Models: 1960 thru 1979 18, 20 and 25 H.P. Outboards

Several new service kits have been released to improve the service life of older 18, 20 and 25 H.P. gearcases.

1. There are two forward gear anti-friction bearing kits to replace the forward gear and bronze friction-type forward bearing used in the 1960 thru 1978 18, 20 and 25 H.P. models. The 1979 and later 25 H.P. models were originally equipped with the anti-friction type forward bearings.

Original forward gear bearing kit tables, part numbers, and Figure 1
CR 79-78
Original second page with clutch dog kit tables, figures 2 through 4, and tool 390880 instructions

Referenced kits and tool

Forward gear kits 390970 and 390972; gear and clutch dog kits 390974 and 391019. Special tool 390880 is used to preload and align the bearings during gearcase reassembly. Consult the factory bulletin above for exact applications and procedures.