
September, 1970
SUBJECT: REWIND STARTER ROPE
ON MODELS: All with Rewind Starter
Effective with the receipt of this bulletin, individual pieces of rewind starter rope will no longer be shipped by the Parts Dept. Starter rope will be sold in 100' rolls only. These rolls are available in three diameters - .130" (P/N 316706), 5/32" (P/N 316704), and 7/32" (P/N 316705).
The chart below indicates the correct roll diameter and length to use to duplicate the original rope. Check the appropriate parts catalog for rope part number and cut from the 100' roll specified.
| ROLL PART NO. | DIAMETER | USE TO MAKE THESE ROPES | |
|---|---|---|---|
| 316706 | .130" | 313153 | 56" Long |
| 316706 | .130" | 315472 | 64" Long |
| 316704 | 5/32" | 203817 | 68-5/16" Long |
| 316704 | 5/32" | 203818 | 65-1/4" Long |
| 316704 | 5/32" | 203819 | 71-1/2" Long |
| 316704 | 5/32" | 203820 | 70" Long |
| 316704 | 5/32" | 304097 | 63-3/4" Long |
| 316704 | 5/32" | 313991 | 34" Long |
| 316704 | 5/32" | 315291 | 44" Long |
| 316705 | 7/32" | 203821 | 72-1/4" Long |
| 316705 | 7/32" | 203822 | 70-3/16" Long |
| 316705 | 7/32" | 204085 | 75-3/4" Long |
| 316705 | 7/32" | 304096 | 69-3/4" Long |
| 316705 | 7/32" | 305000 | 73-3/4" Long |
| 316705 | 7/32" | 307953 | 57" Long |
Special part numbers have been set up for warranty purposes. If a rope is replaced under warranty, it should be cut from the appropriate 100' roll. A warranty claim should then be filed requesting a voucher as indicated on the back side of this bulletin.
| ROLL PART NO. | USE VOUCHER NO. | VOUCHER VALUE |
|---|---|---|
| 316704 | 090050 | $ .50 |
| 316705 | 090070 | $ .70 |
| 316706 | 090035 | $ .35 |
NOTE: No parts will be stocked under the voucher numbers. They are for voucher purposes only.
Doug Cankar
Technical Data Coordinator
DC:rm
NOTE: Post on all Indexes under the heading "Miscellaneous".