Johnson Service Bulletin SB-1253 (January 1971) - Swivel Bracket Seals

Johnson explains how to distinguish two upper swivel bracket seals used on 1968-1971 55-60 HP outboards and includes a service tip on revised API oil classifications.

Johnson Motors Service Bulletin letterhead
SB-#1253

January, 1971

SUBJECT:  SWIVEL BRACKET SEALS #313691 AND 313992

MODELS:  55-60 H.P., 1968 THRU 1971, STANDARD AND LONG SHAFT

Factory photograph comparing swivel bracket seals 313691 and 313992

Two different upper seals have been used in swivel bracket assemblies #383146 and 383147. These seals have the same inside diameter, but different outside diameters. Order replacement seals as follows:

1. If old seal has hard rubber case, order P/N 313691.

2. If old seal has a bright metal case, order P/N 313992.

Make these notations in the appropriate parts catalogs.

JOHNSON MOTORS
Doug Cankar
Technical Data Coordinator

NOTE: Post on your 55-60 H.P. indexes under the heading "Lower Unit".

SERVICE TIP

We have been informed that the American Petroleum Institute oil designations are being changed in January. These are the designations which appear on cans of automotive oil and indicate the usage for which the oil was formulated. The old and new classifications are:

OLDNEW
MLSA
MMSB
MS (1967 or before)SC
MS (1968 - 1970)SD

DC:sl

Tools, supplies and related parts

Suggested products related to this service bulletin. Verify fit and suitability before ordering.

Amazon: tools and supplies

NMMA TC-W3 2-Stroke Marine Outboard Oil & Oil Mixing Ratio Bottle

Search for these supplies on Amazon

eBay: OMC / Evinrude OEM part 313691

Search for original or compatible replacement part 313691. Check the bulletin for supersessions and model fit.

Click here to search on eBay

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.