Back to previous page

SB-1260 - Recommended Minimum Fuel Pump Pressures

Issued April 1971, this Johnson Service Bulletin provides minimum fuel pump pressure specifications for eight pump part numbers at three engine speeds and illustrates the required vented fuel-tank test arrangement.

Johnson Motors Service Bulletin letterhead
SB-#1260
April, 1971
SUBJECT: RECOMMENDED MINIMUM FUEL PUMP PRESSURES
ON MODELS: ALL MODELS
We have had several requests for fuel pump pressure specifications, namely the minimum pressures at which efficient engine operation can be expected. We have, therefore, developed a chart showing the minimum fuel pump pressures required for normal engine operation. When using this chart, refer to the specific parts catalog for the part number of the fuel pump. When checking fuel pressures, the layout illustrated should be closely followed.
FUEL PUMPR.P.M.
6002500 to 30004500
3794801 PSI1.5 PSI2.5 PSI
3800161 PSI1.5 PSI2.5 PSI
3818151 PSI1.5 PSI2.5 PSI
3822241 PSI1.5 PSI2.5 PSI
3823541 PSI1.5 PSI2.5 PSI
3825631 PSI1.5 PSI2.5 PSI
3828751 PSI1.5 PSI2.5 PSI
3837651 PSI1.5 PSI2.5 PSI*
NOTE: Make sure gas cap is vented on gas tank when using the layout illustrated. * - @ 5000 R.P.M.
Factory fuel pump pressure test layout showing engine, tee, pressure gauge, pump under test, carburetor, hose and primer bulb, and vented tank, 30 inch maximum
JOHNSON MOTORS Doug Cankar Technical Data Coordinator
NOTE: Post on all indexes under the heading "Carburetion".
DC:sn

Fuel pump pressure reference

The factory chart specifies minimum pressures of 1 PSI at 600 RPM, 1.5 PSI at 2,500 to 3,000 RPM, and 2.5 PSI at 4,500 RPM for the listed pumps. The asterisk for pump 383765 specifies 5,000 RPM instead of 4,500 RPM. Johnson directs technicians to identify the pump through the applicable parts catalog and to vent the test tank cap.