Johnson Service Bulletin SB-1270 - New Spacer #317661

Issued September 1971, this bulletin explains a spacer added to the starter mounting bracket on 2 H.P. Johnson outboards to prevent choke-lever binding.

Johnson Motors Service Bulletin letterhead
SB-#1270
September, 1971
SUBJECT: New Spacer #317661
ON MODELS: 1971, 2 H.P.
A spacer was recently added between the starter mounting bracket and carburetor. When installed on the port screw, this spacer prevents possible distortion of the control panel which could cause the choke lever to bind. If you have a customer complaint of this nature, you should install a spacer.
NOTE
Johnson model 2R71 built after S/N 3354533
already have the spacer.
Please make a correction to your final edition parts catalogs as indicated in the illustration.
Factory exploded parts diagram showing spacer 317661 and surrounding Johnson 2 H.P. starter and carburetor components
JOHNSON MOTORS

Doug Cankar
Technical Data Coordinator
NOTE: Post on your 2 H.P. index under the heading "Miscellaneous".