Johnson Service Bulletin SB-1281 (January 1972) - “Snap” Shift Improvement

Factory guidance for retrofitting earlier 18, 20, and 25 HP Johnson outboards with the improved snap-shift propeller shaft and clutch dog kit, part number 385426.

Johnson Motors Service Bulletin letterhead
SB-#1281

January, 1972

SUBJECT:  "Snap" Shift Improvement 20 & 25 H.P. Models

Original factory photograph of snap shift propeller shaft, clutch dog components, spring, detent balls and seals

Illustrated above is the propeller shaft and clutch dog kit P/N 385426. The kit employs a double ball and spring detent mechanism which assures very positive engagement of the clutch dog and forward or reverse gear driving lugs. This design has been used on all 20 and 25 H.P. models built since 1971. The purpose of this kit is to make this improved "snap" shift feature available to owners of 1960-1965, 18 H.P., 1965-1970, 20 H.P. and 1969-1970, 25 H.P. models.

The clutch dog, forward and reverse gears have been redesigned to incorporate the "snap" shift feature and provide longer service life. They are, therefore, not interchangeable with previous parts. Although the propeller shaft has been modified to incorporate the "snap" shift feature, it is still interchangeable with the previous propeller shaft.

The propeller shaft and clutch dog kit assembly P/N 385426 includes all of the following individual parts that are also available separately.

(over)

PAGE 2SERVICE BULLETIN   SB-#1281
JOHNSON MOTORS, DIVISION OF OUTBOARD MARINE CORPORATION, WAUKEGAN, ILLINOIS 60085
PART NO.QUANTITYDESCRIPTION
3165021Propeller Shaft
3165011Shifter - Clutch Dog
3845661Gear & Bushing Assembly - Front
3165041Gear - Reverse
3165051Spring - Detent
3165062Ball - Detent
3024931O-Ring-Gearcase Head
*12-7/8"1Seal-Upper to Lower Gearcase

*Cut from 309044 fifty foot roll.

Order all parts from your Parts Distributor.

JOHNSON MOTORS

Doug Cankar
Technical Data Coordinator

DC/bh

NOTE:  Post on your 20 & 25 H.P. index under the heading "Lower Unit".

Historical parts reference

Kit P/N 385426 contains propeller shaft 316502, clutch dog 316501, front gear and bushing assembly 384566, reverse gear 316504, detent spring 316505, two detent balls 316506, O-ring 302493, and a 12-7/8-inch seal cut from bulk roll 309044.

1970-1980 Johnson Service Bulletin Index

Tools, supplies and related parts

Suggested products related to this service bulletin. Verify fit and suitability before ordering.

Amazon: tools and supplies

Marine Propeller Hub Kit & Prop Nut Wrench

Search for these supplies on Amazon

eBay: OMC / Evinrude OEM part 385426

Search for original or compatible replacement part 385426. Check the bulletin for supersessions and model fit.

Click here to search on eBay

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.