SB-1283 - High Speed Orifice #54C, P/N 317646

Issued in February 1972, this Johnson Motors bulletin specifies a revised high-speed carburetor orifice for certain 1972 65 H.P. outboards, with affected serial-number ranges and warranty instructions.

Johnson Motors Service Bulletin letterhead
SB-#1283

February, 1972

SUBJECT:  High Speed Orifice #54C  P/N 317646

ON MODEL:  65ES(L)72

A change has recently been processed to change the subject high
speed orifice on the above model engine to provide proper fuel
mixture at full throttle.

We are recommending that you use orifice #57C under part number
317021 on the 1972, 65 H.P. engine.

NOTE:  Engines built before the following serial numbers must
       have the new orifice P/N 317021 installed:

65ES72S/N 3656793
65ESL72S/N 3663857

Order the required high speed orifices from your Parts Distributor.

After installing them, file a warranty claim with the Johnson Motors
Warranty Department and we will issue a credit voucher.  We will
accept up to a maximum of ten (10) model and serial numbers on each
warranty claim form.  A labor allowance of 1.5 hours at your
warranty labor rate will be paid for each motor completed.

JOHNSON MOTORS

Doug Cankar
Technical Data Coordinator

DC/sn

NOTE:  Post on your 65 H.P. index under the heading "Carburetor".

Tools, supplies and related parts

Suggested products related to this service bulletin. Verify fit and suitability before ordering.

Amazon: tools and supplies

Marine Carburetor Cleaner Spray, Jet Cleaning Wires & Rebuild Kit

Search for these supplies on Amazon

eBay: OMC / Evinrude OEM part 317646

Search for original or compatible replacement part 317646. Check the bulletin for supersessions and model fit.

Click here to search on eBay

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.