SB-1328 - Low Speed Knob Grommet Restricting Air Flow

Issued in October 1973, this Johnson bulletin warns that displaced low-speed adjustment knob grommets can restrict carburetor airflow on 1974 9.9 and 15 H.P. outboards. It also corrects 1974 accessory-catalog tachometer information.

Johnson Service Bulletin letterhead
SB-#1328
October, 1973
SUBJECT: Low Speed Knob Grommet Restricting Air Flow
ON MODELS: 1974, 9.9 and 15 H.P.
Johnson Outboards Service Department has received a few reports of the slow speed knob grommet coming loose and being pulled into the carburetor venturi opening or in some cases all the way through to the leaf plate. This will result in hard starting or no start or premature spark plug fouling.
There are two identical grommets around the slow speed adjusting knob; one in the lower motor cover, the other in the air silencer. Remove the upper motor cover and look between the lower motor cover and the air silencer to be sure both grommets are in place.
Use caution when removing and installing the slow speed adjusting knob to prevent dislodging the slow speed knob grommet which can fall into the air silencer cavity.
JOHNSON OUTBOARDS
D. J. Leinonen Technical Data Coordinator
DL/sn
NOTE: Post on your 9.9 and 15 H.P. indexes under the heading "Carburetion".
FOOTNOTE: The paragraph in the 1974 accessory catalog under "alternator tachometer usage" may be misleading since we do not offer an alternator tachometer which will work on the 1974, 9.9, 15 or 40 H.P. electric models.