
April, 1974
SUBJECT: Ignition Shut-Off Switches
ON MODELS: 2 thru 135 H.P.
We have had many inquiries from dealers regarding the effect on warranty by the installation of "Kill Switches", "Safety Switches" etc. into the ignition wiring circuit.
The installation of an auxiliary switch which would shut off the ignition circuit, if the operator were thrown overboard or lost control of the boat in some other manner by being unexpectedly thrown from the helm position, does not void the outboard warranty.
It must be pointed out that some of these switches which are presently available to marine dealers were not originally designed for marine use and are subject to corrosion which could seriously effect their intended function as well as the performance of the engine.
Some switches which we have examined could, under certain conditions of corrosion, create sufficient resistance which would reduce materially the required available voltage in the ignition circuit. This will manifest itself in hard starting, poor idling and/or erratic performance of the engine.
It is strongly recommended that before any diagnosis of an ignition problem is attempted, the wiring be checked to determine if an ignition cut-off switch has been installed. By-passing the switch and checking the engine with the switch out of the circuit should be the first step in diagnosing suspected ignition problems.
JOHNSON OUTBOARDS
D. J. Leinonen
Technical Data Coordinator
DJL/sn
NOTE: Post on your 2 thru 135 H.P. indexes under the heading "Ignition".